Language

NEWS CENTER
2011 Year

2011-12-30

Our company has successfully held the third council meeting of the seventh session of the China Watch Association

On December 26,2011, our company was commissioned by the China Watch Association to undertake the association's seven three council meetings, the meeting was held in the scenic Fuzhou Yushan Hotel.

Read More
2011 Year

2011-12-29

Instrument Business Department to carry out the development of high-level management training

December 3 is a sunny day, the instrument business department organized 25 senior managers to conduct a one-day outdoor training. Early in the morning took the development training company bus to Yongtai Qianjiangyue Farm. The training received the attention and support of the instrument business department, most of the middle and senior management took part in the whole course of this training.

Read More
2011 Year

2011-12-29

Continuous implementation of 5S management activities-instrument division set up“5s promotion group”

Carrying out 5s management is an important and effective method and means to strengthen the field management, improve the working environment and improve the management level of the grass roots, the company has made it clear that 5s management into the establishment and assessment of the grass-roots an important content. Before this, the company carried out a 5S training, and in the company-wide 5s work, has achieved certain results. In response to the call of the company, the instrument division set up a“5s promotion group”, leading the department's 5S activities in-depth development.

Read More
2011 Year

2011-11-24

The chairman of the China Watch Association, Tian Minyu, and his party came to WIDE PLUS

On the morning of 11 November 2011, mr. Tian minyu, chairman of the China Watch Association, Mr. Zhang Hongguang, Vice Chairman of the China Watch Association, accompanied by leaders of the Fujian Watch Association, came to visit WIDE PLUS Enterprise, the executive director of the China Watch Association, mr. Su Fangzhong, vice president of WIDE PLUS Enterprises, received the guests.     Mr. Tian Minyu and his party visited the WIDE PLUS Engineering Center and the movement production workshop. Both sides communicated with each other about the market information of quartz watch movements at home and abroad, and the Assembly automation production line, technology research and development of the clock enterprise are discussed.

Read More
2011 Year

2011-11-24

Participants of the Fujian University of Technology “Key automation training class of Changji Prefecture, Xinjiang” paid a visit

On November 9,2011, under the leadership of Li Jianxing, head of the Department of Electronic Information and Electrical Engineering, Chen Qingzhou and Jiang Pengyu, Fujian University of Technology of the department, “Xinjiang Changji automation backbone training class” students to visit the company. The training course has a total of 39 students, all from well-known enterprises in Changji Prefecture, Xinjiang and some of the technical backbone of colleges and universities, such as Guowang Energy Xinjiang Fukang Power Generation Co. , Ltd. , COFCO tunhe Changji Tomato Products Co. , Ltd. , Xinjiang Xichang Peak Boiler Co. , Ltd. .       The workshop was organized by the Fujian University of Technology on behalf of the Changji provincial government. An important part of the workshop was the selection of a manufacturing company with influence in the automation industry, after careful consideration, the Fujian University of Technology finally chose Fujian WIDE PLUS Precision Instruments Co. , Ltd. . Our company expressed full support for this event, which is divided into two parts. First of all in the company's conference room by Zhou Daochun manager made the theme of“Good if water, moisten things silent” business introduction. Then, I visited the Flowmeter Workshop, Engineering Center, Injection Workshop, instrument workshop, transmitter workshop and control valve workshop, accompanied by Fan Lipeng, manager of Technical Support Department. After the inspection, students not only to our company's history, products, production lines have a certain degree of understanding, but also the production of high-precision automation instruments have a new sense of understanding. The students all said that the visit was very fruitful and highly appreciated by our company, and thanked us for our warm reception.  

Read More
2011 Year

2011-11-24

Our two invention patents are authorized and certified

Recently, the self-developed “Watch calendar wheel or calendar wheel of the positioning device of the bar limit”, “A multi-functional watch clutch” by the State Intellectual Property Office authorized and issued a Patent Certificate of Invention. The patents were State Intellectual Property Office in January 2010 and April 2010 respectively, after a year and a half recently issued a patent for invention. The granting of these two invention patents marks a new stage in our independent scientific research level, and creates new resplendence for the company's rapid development and technological upgrading.

Read More
2011 Year

2011-10-31

TC124TC338 annual meeting

October 25-27,2011, the 4th plenary meeting of TC124 and the 4th plenary meeting of TC338 were held in Jingcheng Hotel, Fuzhou City, China, a total of 200 delegates attended the meeting.     The meeting was attended by Standardization Administration of China Director Sun Wei, Ministry of Science and Technology of the People's Republic of China Director Zhou Ping, Department Director of equipment, Ministry of Industry and Information Technology Tan Xiangning, and vice president Zou Chong of Fujian WIDE PLUS Precision Instruments Co. , Ltd. .     At the meeting, Standardization Administration of China Director Sun Wei extended warm congratulations on the convening of the fourth plenary meeting of SACTC124 and emphasized the important role of process measurement and control technology and standardization, this paper introduces the general requirements of the National Standardization work determined in 2011, and puts forward that the management procedure of the standard establishment and revision should be reformed and perfected, the system should be perfected, the management should be strict, the responsibility should be carried out, and the closed loop should be formed. Director Sun Wei fully affirmed the work and achievements of the bid committee over the past year, and requested that the bid committee should seize the development opportunities of strategic emerging industries, further improve the level of our measurement control and automation equipment standardization work.     Zhou Ping, director of the Ministry of Science and Technology of the People's Republic of China high-tech department, reported on the State of Science and technology development planning in the fields of advanced manufacturing and automation during the “Fifteen” period, as well as to the manufacturing industry and the manufacturing technology development tendency and the characteristic, our country manufacturing industry faces the challenge, the green manufacturing and the intelligent manufacturing technology development demand background, the strategic goal and the main task.    Zou Chong, vice-president of Fujian WIDE PLUS Precision Instruments Co. , Ltd. , introduced the active participation of WIDE PLUS enterprises in domestic international standard work in recent years and expressed full support for the work of SACTC124. He wished the conference a complete success.     Professor Ouyang Jinsong, secretary-general of SAC/TC124, made the fourth annual work report of SAC/TC124 in 2011. The secretary-general or chairman members of SAC/TC124/SC1-SC10 made the annual work report of each sub-committee in 2011 The meeting also reviewed draft national standards such as HART protocol specifications and technical specifications for Industrial Ethernet switches for measurement and control.     During the conference, all delegates were also organized to visit Fujian WIDE PLUS Precision Instruments Co. , Ltd. . President Huang Xunsong and vice president Zou Chong introduced the company's development goals and product lines to the delegates respectively, on the evening of the 25th, a welcome dinner was held to welcome all delegates to Fuzhou.     Finally, SAC/TC124 secretary-general Professor Ouyang Jinsong made a summary speech to the General Assembly, and thanked the leaders and members for their strong support to the work of the Secretariat of the bid commission, and promised that the Secretariat of the Tender Commission will continue to serve members well in the future work. On behalf of the Secretariat of the bid committee and all the representatives present, he thanked the organizer of the meeting, Fujian WIDE PLUS Precision Instruments Co. , Ltd. , for their efforts in organizing the meeting.     The meeting successfully completed the scheduled tasks, in a harmonious atmosphere of unity and victory in the closing!  

Read More
2011 Year

2011-09-05

WIDE PLUS enterprises co-organized “Fifteen” planning of key industries on instrumentation and control system requirements report

With the announcement of the “Fifteen” plan and the “12th five-year” plan, the instrumentation industry will usher in a new journey of large-scale development in the next five years. In the next five years, the output and sales value of instrument industry is planned to increase by 15% annually, with a cumulative increase of more than 74.9% , and the scale of instrument sales will nearly double during the 12th five-year plan period. During the period, the profit of the whole industry will reach 71.3 billion yuan, with an average annual growth rate of 13% . The profit margin of main revenue will reach 8.5% -9% , and the total assets will reach 870 billion yuan.     The year 2011 is the beginning of the 12th five-year plan and the key year of economic and social transformation in our country. In order to carry out our country's“12th five-year plan” scientific and technological development plan for instrumentation industry, we should know more about the demand of each key industry for instrumentation, sponsored by China Instrumentation Society, China Instrumentation Society Automation Engineering Design Committee, fujian WIDE PLUS Precision Instrument Co. , Ltd. co-organized the“12th five-year plan” key industries to instrument and control system demand report held on August 30,2011 in Beijing China International Exhibition Center.     National 15 industries, 25 provinces, cities and regions of the design institute in charge of leadership, experts and instrument manufacturers on behalf of a total of more than 200 people attended the meeting. As a co-organizer, Mr. Zou Chong, vice president of the company, delivered a speech on behalf of WIDE PLUS Enterprise at the opening ceremony of the meeting.     At the meeting, more than a dozen industry experts have made “Fifteen” instrument demand reports for thermal power, new energy, hydropower, nuclear power, petroleum and chemical, offshore oil and gas, coal chemical, steel, coking and fire-resistant, mineral processing and sintering, non-ferrous metallurgy, textiles and chemical fiber, paper making, coal-to-oil and other industries.  

Read More
2011 Year

2011-09-05

Shanghai run enterprise with new products launched miconex 2011

The zero sessions of miconex 2011 was held at the China International Exhibition Centre in Beijing from August 30 to September 2,2011.         Miconex is one of the most influential events in the field of instruments and meters both at home and abroad. This year, more than 500 domestic and foreign enterprises participated in the exhibition, and nearly 10,000 new types of instruments and meters were exhibited, such as scientific instruments, industrial automation instruments and control systems, electronic and electrical measuring instruments, instrument materials and components, sensors, instrumentation process equipment and processing equipment, industrial automation information technology and software.        WIDE PLUS enterprise is located in Booth 1B037, Hall 1, with an area of 126 square meters, the products such as transmitter, flowmeter, level meter, control valve, high temperature and high pressure valve group, display control instrument, wireless transmission module etc. . In addition, the booth also set up an interactive area for the audience, carried out guessing games, intelligence games, enterprise introduction, product introduction and other rich and varied award-winning quiz activities, has been the general audience's active participation and pursuit.  

Read More
2011 Year

2011-09-05

The second stage of the national tour promotion meeting of Shangrun Instrument Department was successfully concluded

After summing up the first phase of WIDE PLUS brand promotion meeting and fully understanding the market demand, the company organized the second phase WIDE PLUS brand promotion meeting in order to expand WIDE PLUS brand influence, so that more do not understand the user and potential users to fully understand the production strength of WIDE PLUS enterprises and production of product categories.     July 5, Guiyang, July 11, Mianyang, July 13, Chongqing, July 15, Baoji, July 16, Xi'an, August 27, Qingdao     The presentation meeting held jointly with the Technical Service Center and Technical Support Department enables participants to have a better understanding of the origin of WIDE PLUS's name, WIDE PLUS's development process, WIDE PLUS's business philosophy, WIDE PLUS's advanced technology and equipment, WIDE PLUS's various series of instrument products, etc. . Many participants believe that WIDE PLUS enterprises will lead China's automation industry to a higher level, to enhance the status of China's automation industry in the international.    

Read More
2011 Year

2011-06-02

Fujian provincial leaders to visit the company to inspect the second phase of the project

On the afternoon of June 2,2011, provincial party secretary Sun Chunlan, acting Governor Su Shulin and other provincial leaders led leading party and government leaders from all districts and cities in the province as well as heads of relevant departments directly under the province to conduct work inspections at the company, huang xunsong, chairman of the company, introduced the progress of the second phase of the project and accompanied the visit to the precision manufacturing department of the Engineering Center. After learning about the new technology and products developed by the company, Secretary Sun Chunlan and his party, Su Shulin, acting governor of the province, affirmed the development of the company and hoped that the company would further expand its scale, continue to extend the industrial chain, the company will continue to grow and become a leading instrument industry enterprises.

Read More
2011 Year

2011-05-13

Low-carbon industry brings new development opportunities to instrument industry

“Low-carbon economy” is more and more accepted by people. If we want to achieve the goal of energy conservation and emission reduction, we must conduct accurate energy collection, measurement and real-time monitoring, analysis, and load control, this requires that the instrument, especially the electric energy measuring instrument and the electric power automatic management system products have the high intelligence, the network, the strong reliability characteristic.

Read More
2011 Year

2011-05-05

The first stage of the national tour promotion meeting of WIDE PLUS Instrument Department was successfully completed

The second phase of the project will be put into full operation in 2011, the instrument marketing department reported, in order to let more new and old customers know the current enterprise scale, production strength and development direction of WIDE PLUS. In April, the instrument marketing department, together with the technical service center and the first-level agents, held a total of 10 times in the nationwide run-on brand promotion.     The National Tour brand promotion meeting is aimed at agents, distributors, design institutes and direct users, this paper mainly introduces the origin of WIDE PLUS's name, WIDE PLUS's development process, WIDE PLUS's management concept, WIDE PLUS's advanced technology and equipment, WIDE PLUS series of instrument products, etc. . After listening to the meeting, all the customers expressed that the WIDE PLUS company had advanced equipment and technology, complete product series and first-class technology. They hoped that WIDE PLUS company could produce better and higher-precision products and make the domestic brands bigger and stronger, to provide users with quality and low-cost domestic instrumentation.  

Read More
2011 Year

2011-03-22

The company participated in the zero th China International Petroleum and petrochemical technology and equipment exhibition

The 11th China International Petroleum and petrochemical technology and equipment exhibition (CIPPE2011) was held at the China International Exhibition Center (New Pavilion) in Beijing from March 22 to 24,2011. The exhibition will attract 45 countries and regions from the world's 1500 exhibitors, exhibition area of 80,000 square meters.     WIDE PLUS company in this exhibition focused on the company's second-phase production base of cutting-edge processing equipment and transmitters, valves, wireless communications products, petroleum and petrochemical units have been widely concerned by experts at all levels. China International Petroleum and petrochemical technology and equipment exhibition (CIPPE) is the largest petroleum and petrochemical professional exhibition in the world.  

Read More
2011 Year

2011-03-12

Report on WIDE PLUS Arbor Day

In order to thank the staff for years of hard work, to review the years of growth with WIDE PLUS Enterprises, recall the past shared good times, enhance staff pride and sense of honor. On March 12, National Arbor Day, the Instrument Business Department invited more than 100 employees, their families and representatives of agents to participate in the collective arbor activity. Tree planting activities to the family as a unit, each family planted a tree sapling, in the sapling hanging engraved with the name of the tree planter plaque and award certificates of Honor. After the end of tree planting, all personnel visit the old factory site of copper plate, common back to 100 million in the run through the process.      

Read More
2011 Year

2011-03-02

The company held the Information Project Launch Conference

The information technology project team reported that the company held a meeting on March 2,2011 to launch the information technology project of Shangrun Enterprises. Mr. Zou Chong, the company's vice president, made an important speech at the meeting, this paper expounds that the start-up of informatization project has great and far-reaching significance for the development of enterprises, and expresses great support for this project, and requests all relevant departments of the company to do their utmost, strive to achieve quality, on time to complete the information project.     At the meeting, the software side introduced the ERP implementation plan, specific methods and key success factors, and said that at all costs and costs to ensure the implementation of the project progress and success on-line.     The convening of this meeting marks the official start of the information project project of Shangrun Enterprise. Not only did Shangrun and the software side of the project implementation personnel list be confirmed at the meeting, at the same time stressed that the department heads will play a leading role. Subsequently, the heads of various departments have said that they will fully cooperate with the work of the project team, for the company's information-based construction to contribute their own strength.    The significance of the launch of the conference is to officially open the prologue of the company's information project, so that the company toward modernization, information management took a solid step.

Read More
WIDE PLUS

The main business of Fujian WIDE PLUS Precision Instrument Co., Ltd. involves the R&D and manufacturing of pressure, flow, temperature, liquid level, photoelectricity, water quality and other parameter sensors as well as instrumentation tubes and valves in the industrial field; the R&D and manufacturing of high-precision automation equipments; high-precision mechanical machining; and the products and overall solutions of the city's intelligent water affairs.

Fujian WIDE PLUS Precision Instrument Co., Ltd.

ADD:No.16, Xingye West Road, Mawei High-tech Zone,Fuzhou,Fujian China
Email:info@wideplus.com
Fax:0591-83969222

0591-83969444

Toll-free technical service number:

400-887-6339

WIDE PLUS

Follow Us On

Username used for comment:
客户留言
Description:

Copyright © 2023 Fujian WIDE PLUS Precision Instrument Co., Ltd. 
闽ICP备05035149号-1  Powered by saa