Language

NEWS CENTER
>
>
>
>
TC124TC338 annual meeting

TC124TC338 annual meeting

TC124TC338 annual meeting

(Summary description)October 25-27,2011, the 4th plenary meeting of TC124 and the 4th plenary meeting of TC338 were held in Jingcheng Hotel, Fuzhou City, China, a total of 200 delegates attended the meeting.
    The meeting was attended by Standardization Administration of China Director Sun Wei, Ministry of Science and Technology of the People's Republic of China Director Zhou Ping, Department Director of equipment, Ministry of Industry and Information Technology Tan Xiangning, and vice president Zou Chong of Fujian WIDE PLUS Precision Instruments Co. , Ltd. .
    At the meeting, Standardization Administration of China Director Sun Wei extended warm congratulations on the convening of the fourth plenary meeting of SACTC124 and emphasized the important role of process measurement and control technology and standardization, this paper introduces the general requirements of the National Standardization work determined in 2011, and puts forward that the management procedure of the standard establishment and revision should be reformed and perfected, the system should be perfected, the management should be strict, the responsibility should be carried out, and the closed loop should be formed. Director Sun Wei fully affirmed the work and achievements of the bid committee over the past year, and requested that the bid committee should seize the development opportunities of strategic emerging industries, further improve the level of our measurement control and automation equipment standardization work.
    Zhou Ping, director of the Ministry of Science and Technology of the People's Republic of China high-tech department, reported on the State of Science and technology development planning in the fields of advanced manufacturing and automation during the “Fifteen” period, as well as to the manufacturing industry and the manufacturing technology development tendency and the characteristic, our country manufacturing industry faces the challenge, the green manufacturing and the intelligent manufacturing technology development demand background, the strategic goal and the main task.

   Zou Chong, vice-president of Fujian WIDE PLUS Precision Instruments Co. , Ltd. , introduced the active participation of WIDE PLUS enterprises in domestic international standard work in recent years and expressed full support for the work of SACTC124. He wished the conference a complete success.

    Professor Ouyang Jinsong, secretary-general of SAC/TC124, made the fourth annual work report of SAC/TC124 in 2011. The secretary-general or chairman members of SAC/TC124/SC1-SC10 made the annual work report of each sub-committee in 2011 The meeting also reviewed draft national standards such as HART protocol specifications and technical specifications for Industrial Ethernet switches for measurement and control.
    During the conference, all delegates were also organized to visit Fujian WIDE PLUS Precision Instruments Co. , Ltd. . President Huang Xunsong and vice president Zou Chong introduced the company's development goals and product lines to the delegates respectively, on the evening of the 25th, a welcome dinner was held to welcome all delegates to Fuzhou.
    Finally, SAC/TC124 secretary-general Professor Ouyang Jinsong made a summary speech to the General Assembly, and thanked the leaders and members for their strong support to the work of the Secretariat of the bid commission, and promised that the Secretariat of the Tender Commission will continue to serve members well in the future work. On behalf of the Secretariat of the bid committee and all the representatives present, he thanked the organizer of the meeting, Fujian WIDE PLUS Precision Instruments Co. , Ltd. , for their efforts in organizing the meeting.
    The meeting successfully completed the scheduled tasks, in a harmonious atmosphere of unity and victory in the closing!

 


  • Categories:2011 Year
  • Author:
  • Origin:
  • Time of issue:2011-10-31 13:14
  • Views:0
— Release time — 2011-10-31

    October 25-27,2011, the 4th plenary meeting of TC124 and the 4th plenary meeting of TC338 were held in Jingcheng Hotel, Fuzhou City, China, a total of 200 delegates attended the meeting.
    The meeting was attended by Standardization Administration of China Director Sun Wei, Ministry of Science and Technology of the People's Republic of China Director Zhou Ping, Department Director of equipment, Ministry of Industry and Information Technology Tan Xiangning, and vice president Zou Chong of Fujian WIDE PLUS Precision Instruments Co. , Ltd. .
    At the meeting, Standardization Administration of China Director Sun Wei extended warm congratulations on the convening of the fourth plenary meeting of SACTC124 and emphasized the important role of process measurement and control technology and standardization, this paper introduces the general requirements of the National Standardization work determined in 2011, and puts forward that the management procedure of the standard establishment and revision should be reformed and perfected, the system should be perfected, the management should be strict, the responsibility should be carried out, and the closed loop should be formed. Director Sun Wei fully affirmed the work and achievements of the bid committee over the past year, and requested that the bid committee should seize the development opportunities of strategic emerging industries, further improve the level of our measurement control and automation equipment standardization work.
    Zhou Ping, director of the Ministry of Science and Technology of the People's Republic of China high-tech department, reported on the State of Science and technology development planning in the fields of advanced manufacturing and automation during the “Fifteen” period, as well as to the manufacturing industry and the manufacturing technology development tendency and the characteristic, our country manufacturing industry faces the challenge, the green manufacturing and the intelligent manufacturing technology development demand background, the strategic goal and the main task.

   Zou Chong, vice-president of Fujian WIDE PLUS Precision Instruments Co. , Ltd. , introduced the active participation of WIDE PLUS enterprises in domestic international standard work in recent years and expressed full support for the work of SACTC124. He wished the conference a complete success.

    Professor Ouyang Jinsong, secretary-general of SAC/TC124, made the fourth annual work report of SAC/TC124 in 2011. The secretary-general or chairman members of SAC/TC124/SC1-SC10 made the annual work report of each sub-committee in 2011 The meeting also reviewed draft national standards such as HART protocol specifications and technical specifications for Industrial Ethernet switches for measurement and control.
    During the conference, all delegates were also organized to visit Fujian WIDE PLUS Precision Instruments Co. , Ltd. . President Huang Xunsong and vice president Zou Chong introduced the company's development goals and product lines to the delegates respectively, on the evening of the 25th, a welcome dinner was held to welcome all delegates to Fuzhou.
    Finally, SAC/TC124 secretary-general Professor Ouyang Jinsong made a summary speech to the General Assembly, and thanked the leaders and members for their strong support to the work of the Secretariat of the bid commission, and promised that the Secretariat of the Tender Commission will continue to serve members well in the future work. On behalf of the Secretariat of the bid committee and all the representatives present, he thanked the organizer of the meeting, Fujian WIDE PLUS Precision Instruments Co. , Ltd. , for their efforts in organizing the meeting.
    The meeting successfully completed the scheduled tasks, in a harmonious atmosphere of unity and victory in the closing!

 

Leave a comment

All Comments
There have been 0 comments
There is currently no content to display
Please add data record on website background.

Latest News

Former

Former Hong Kong Chief Executive Carrie Lam and her delegation visited WIDE PLUS for research and guidance

On the morning of November 16, the fifth Chief Executive of the Hong Kong Special Administrative Region and the permanent honorary President of the Hong Kong Chamber of Commerce of Fujian Province, Lam Cheng Yue-ngor and her delegation, accompanied by Chen Dong, deputy secretary of the Party Group of the Standing Committee of the Fujian Provincial People's Congress, visited Fujian WIDE PLUS to carry out an investigation and research on the theme of "Jointly building the Belt and Road and Helping the development of Fujian and Hong Kong". Company chairman Huang Xunsong, Vice president Zou Chong, director Wu Xiaojing warmly received and reported the work. Lam visited the company's exhibition hall to learn about the company's major business sectors such as industrial automation, and to further understand the technology research and development innovation. In the process of research, Chairman Huang Xunsong reported the basic situation of WIDE PLUS to Lin Zhengyuet-Ngor and his delegation, as well as the contribution made by WIDE PLUS in aerospace, petroleum and petrochemical fields in recent years. Lam said that Hong Kong is promoting the development of innovation and technology in an all-round way, covering scientific research, financing, production, talent and other fields, and looking forward to cooperating with Fujian and Hong Kong enterprises in professional fields to promote the common prosperity of Fujian and Hong Kong.   More services please pay attention to the public number
2023-11-16
Discuss

Discuss and jointly build | Fujian WIDE PLUS and experts from Northeast Process Automation Design Committee lead the localization process

In order to jointly explore the development prospect planning of replacing imported instruments with domestic instruments and build an exchange and cooperation platform, on October 27, experts from the Northeast Process Automation Design Professional Committee led a team to carry out inspection and exchange guidance in Fujian WIDE PLUS.
2023-10-31
More

More services please pay attention to Fujian WIDE PLUS won the Fuzhou Mawei High-tech Park "Harmony Cup" employee tug-of-war invitational third public number

In order to enrich the leisure cultural life of the workers in the park, show the good spirit of the workers, create a united, hard work, lively, rigorous and orderly working atmosphere, and achieve the purpose of physical fitness, Fuzhou Economic and Technological Development Zone Mawei Park Federation of Trade Unions held the "Harmony Cup" Tug-of-war Invitational competition for workers in Mawei Stadium at 2:00 PM on October 27. Fujian WIDE PLUS team members actively play the spirit of teamwork, hard work, through multiple rounds of competition won the third place.
2023-10-27
The

The 31st China International Measurement Control and Instrumentation Exhibition was successfully concluded, and Fujian WIDE PLUS harvested a lot

The 31st China International Measurement Control and Instrumentation Exhibition was successfully closed in Beijing National Convention Center. Fujian WIDE PLUS received hundreds of professional users in various fields such as design institutes, supporting facilities, distribution and terminals during the exhibition, and gained a lot.
2023-10-25
WIDE PLUS

The main business of Fujian WIDE PLUS Precision Instrument Co., Ltd. involves the R&D and manufacturing of pressure, flow, temperature, liquid level, photoelectricity, water quality and other parameter sensors as well as instrumentation tubes and valves in the industrial field; the R&D and manufacturing of high-precision automation equipments; high-precision mechanical machining; and the products and overall solutions of the city's intelligent water affairs.

Fujian WIDE PLUS Precision Instrument Co., Ltd.

ADD:No.16, Xingye West Road, Mawei High-tech Zone,Fuzhou,Fujian China
Email:info@wideplus.com
Fax:0591-83969222

0591-83969444

Toll-free technical service number:

400-887-6339

WIDE PLUS

Follow Us On

Username used for comment:
客户留言
Description:

Copyright © 2023 Fujian WIDE PLUS Precision Instrument Co., Ltd. 
闽ICP备05035149号-1  Powered by saa