On December 8,2018, Fujian WIDE PLUS Precision Instrument Co. , Ltd. successfully passed the evaluation of the implementation of the standards of the integrated management system of the two chemicals, and was awarded the “Evaluation Certificate of the Integrated Management System of the two chemicals” by the China Classification Society, gB/T23001-2017 standard to become a national-level integration of two management system standard enterprises. Evaluation Certificate of Integration Management System          In recent years, the company vigorously carry out information construction, and achieved substantial results. In 2015, the company applied for the Ministry of Industry and Information Technology Integration Project pilot qualification, becoming the second national-level implementation of the system pilot units, since then the company rigorously promote the implementation of the system, and in March 2018 to set up a joint project team, the formal launch of the two integration system standard project. During the process of project promotion, the project team strictly followed the requirements of system construction, and went through the stages of status investigation and diagnosis, top-level design, system planning and implementation, New-type capability building, internal and external evaluation and review, etc. , successfully set up a complete and realistic integration of management system, innovation to create“High-precision instrument research and supply-marketing integration management and control” capacity. The whole project lasted 24 months, with a total of 26 standardized control procedures, 64 related system documents and 118 records completed, it has organized 11 important project meetings and 5 internal and external review meetings. In December 2018, it successfully passed the National Ministry of Industry and Information Technology and was awarded the Evaluation Certificate.   Two integration management system standard launch meeting site          “Two-integration” is a national strategy promoted by the Ministry of Industry and Information Technology. It is a deep combination of information and industrialization in technology, products, services, management and other aspects, and is a strategic tool to promote the core competitiveness of enterprises, it is of far-reaching significance to promote the transformation and upgrading of enterprises. The adoption of the certification of the integration management system marks that the company has made remarkable achievements in promoting the deep integration of the two and has been approved by the state.           The company will continue to further promote the integration of the two, and strive to build a national-level integration management system to mark the model enterprise, and constantly achieve enterprise management, business operations, information construction and other key areas of technological innovation, for the enterprise to continue high-quality innovation and development of new momentum.   Wechat public number: UP run automation

In order to sum up the experience, carry forward the righteous spirit, commend the advanced, and further stimulate the enthusiasm of the vast number of party members and cadres for starting their own businesses, the Organization Department of the Fuzhou Municipal Committee and other departments jointly commended 35 enterprises, including Fujian WIDE PLUS Precision Instrument Co. , Ltd. , for their outstanding performance in the field of honest management in recent years, and awarded the title of“Party member honest enterprise”.     In order to thoroughly implement the thought of socialism with Chinese characteristics in the new era and the spirit of the 19th National Congress of the Communist Party of China, with the goal of improving the image of commercial credit, and closely integrate the development reality of the Blessed Prefecture of the times, giving full play to the exemplary and leading role of non-public enterprise party organizations and party members in the construction of social integrity, the Organization Department of the Fuzhou Municipal Party Committee and other departments jointly carried out activities to create“Party members' Integrity Enterprises”, focus on building a credit industry with Fuzhou characteristics, to achieve the party building work and economic and social development of benign interaction. Fujian WIDE PLUS Precision Instruments Co. , Ltd. as an excellent representative of the integrity of the business has been“Party members of the integrity of the enterprise” title.      The company will, as always, continue to learn, consciously align itself with the party central committee, Align itself with the party's theory, line, principles, and policies, and fully implement the decisions and plans of the Central Committee, the provincial party committee, and the Municipal Party Committee, and strive to develop and grow from a higher starting point, strive to be the vanguard of a new era and a new journey. Wechat public number: UP run automation

40 years to forge ahead, 40 years to forge ahead, 40 years to Dead Poets Society. Over the past 40 years of reform and opening up, more than zero entrepreneurs have forged a new and promising path through economic restructuring and comprehensive reform, wrote a magnificent epic of the development of the country and the nation. 　　  To further consolidate strength and inspire morale, and to showcase the vivid practices and typical samples of Fuzhou Enterprises and entrepreneurs since the reform and opening up, and to show the responsibility and deeds of these pathfinder of the times, starting from December 1, fuzhou News Network, in conjunction with the Fuzhou Federation of Enterprises and entrepreneurs and Hengshen Group, has launched an exclusive interview with 40 entrepreneurs from state-owned and private enterprises, explain Fuzhou and China's 40 years of determined road and development, witness the process of China's reform and opening up. Huang Xun song 【Business cards for entrepreneurs】 　　Huang xunsong, graduated from Tianjin University Precision Instruments, is now chairman and president of Fujian WIDE PLUS Precision Instruments Co. , Ltd. . Fujian province Outstanding Talents, Fuzhou outstanding talents, Fuzhou honorary citizens, Economic and Technological Development Zones to introduce high-level outstanding talents, vice-president of the Association of foreign-invested enterprises. Appointed by the Committee of Tianjin University Experts to consult and review experts for the instrumentation industry. It has undertaken and successfully completed a number of provincial and municipal key research projects. He has won the third prize of National Scientific and technological progress, the second prize of Provincial Scientific and technological progress, the Outstanding Achievement Award of Provincial Technological Development, and has more than 60 invention patents and utility model patents. 【Business card】 　　Fujian WIDE PLUS Precision Instrument Co. , Ltd. was founded in 1991, is a professional engaged in industrial automation and high-precision machinery manufacturing instrumentation enterprises, it has been recognized as a high-tech Enterprise of Fujian province, the first batch of innovative enterprises of Fujian Province, the top 10 private enterprises of Fuzhou Province, the practice base of post-doctoral innovation of Fujian Province, the National Skills Master Studio, and the Skills Master Studio of Fujian Province. Wechat public number: UP run automation

The 8th Hong Kong Innovation and Technology Achievement Awards held a grand prize presentation ceremony in Hong Kong on December 11. “A kind of NB-IoT-based wireless intelligent remote transmission water meter”, which was independently developed and manufactured by our company, won the Gold Award of Asian International Innovation Invention Award.

On the afternoon of November 29, Fuzhou Municipal Party Committee and Municipal Government held a private economy development conference to set up a typical example, commend the advanced, and further mobilize the enthusiasm, initiative and creativity of the private enterprises in the whole city to speed up their development, in recognition of 60 Outstanding Private Enterprises, WIDE PLUS was awarded the top 10 private enterprises in Fuzhou for industrial development. Leaders including Wang Ning, member of the Standing Committee of the Fujian Provincial Committee and Secretary of the Fuzhou Municipal Committee, Zheng Xincong, vice governor of Fujian Province, and You Mengjun, Mayor of Fuzhou, attended the meeting.    Over the past 40 years of reform and opening-up, Fuzhou's departments at all levels have earnestly implemented the decisions and plans of the Central Committee, the Provincial Committee and the provincial government, and unswervingly encouraged, supported and guided the development of the private economy.     The private sector is an important achievement of Socialist market economy development and an important driving force for Socialist market economy development. The majority of private entrepreneurs are pioneering, innovative and Veronica Guerin, and have made important contributions to the high-quality development of Fuzhou, a large number of outstanding private enterprises with strong innovation ability, rapid development, high management level and large social contribution have emerged.       The conference awarded the top ten private enterprises for industrial development, the top ten private enterprises for private investment, the top ten private enterprises for invention and innovation, and the top ten private enterprises for expanding employment, “Top 10 private enterprises for business development”, “Top 10 private enterprises for agricultural development” and other six titles totaling 60 outstanding private enterprises, and will be announced and commended. Fujian WIDE PLUS Precision Instruments Co. , Ltd. , Fuyao Glass, New World Digital Technology Co. , Ltd. and other 10 enterprises were awarded the “Top 10 private enterprises in industrial development”.       WIDE PLUS, Fujian, will not forget its original intention and forge ahead. Under the call of the Fuzhou Municipal Party Committee and municipal government, it will continue to explore and innovate, carry forward its achievements, make further efforts, and better play its leading role as an example, to promote high-quality development in Fuzhou.     Wechat public number: UP run automation

On November 22,2018, the first meeting of the preparatory group for the Fujian Blockchain Development Promotion Association was successfully held in Mawei District, Fuzhou Province, and all preparatory work for the establishment of the association was launched. Fujian WIDE PLUS attended the meeting as a supervisor of the Promotion Association.   Chen deling, deputy director of the Information Promotion Department of the Provincial Industry and Information Administration, Lin Duanxiong, deputy director of the Municipal Economic and Information Commission, and other leaders were invited to attend the meeting. Liu Zhengnong, head of the preparatory group of the provincial blockchain development promotion association and secretary-general of the Provincial Iot Industry Alliance, presided over the meeting.     Deputy director Chen Deling stressed that the block chain technology traceability, tamper-proof, trustworthiness, enterprises can reduce costs, improve efficiency, individuals can play a role in privacy protection, information confirmation; As the next generation of the Internet, the government needs to actively guide in this regard in order to meet the new wave of information; For the government and enterprises, enterprises and enterprises to build an important communication, exchange and docking platform.   Deputy Director Lin Duanxiong pointed out that the blockchain is still in the early stage of development, enterprises should grasp the development trend, make good use of national policy, embrace government supervision, take a bright and healthy road of development; The Fuzhou government is planning to set up an integrated experimental zone on the blockchain in Fuzhou. It is hoped that the development of the blockchain in Fujian province will take advantage of the city's location and pool resources to contribute to the construction of the pilot zone.   The meeting was briefed on the preparatory work. And representatives of participating enterprises together to discuss the Fujian province Blockchain Development Promotion Association Constitution (Draft) , membership fee management measures (draft) and the establishment of the conference-related matters. The meeting proposed to convene on January 8,2019, Fujian province blockchain development to promote the establishment of the conference.

WIDE PLUS attended the third plenary session and annual meeting of the fifth session of the National Watch and clock standardization technical committee held in Suzhou from November 22 to 25,2018. The main contents of the meeting include the 2018 work summary and 2019 work plan of the National Watch and clock standardization technical committee, vice Chairman Zhang Fang of the National Watch and clock standardization technical committee chaired the meeting, which also reviewed seven national and industry standards and considered projects to be submitted to the national standards and Industry Standards Program in 2019. Brief introduction of National Watch Standardization Technical Committee          TC160, the National Watch and clock standardization technical committee, was approved and established by the former state quality and Technical Supervision Bureau, the only technical body standardized by the watch and clock industry, which has been confirmed by the first batch of Standardization Administration of China, engaged in the standardization of daily use clocks, watches, timers, timekeeping instruments for different purposes in various industries, as well as the technical fields of timekeeping instruments, such as zero, component parts, original auxiliary materials, etc. , also responsible for national standards, industry standards convergence (interpretation) management. The clock and watch Mark Committee is a more technical coordination and management body, and it is guided by the relevant guidelines and policies of the state, to make recommendations to the Standardization Administration of China Industry and the China Federation of light industry on policies, guidelines and technical measures for the standardization of the watch industry, to organize the formulation, revision and review of national and industry standards. The clock and watch standard committee acts as a bridge between government and enterprises and between enterprises.         It is also Standardization Administration of China as the sole domestic focal point of ISO TC 114, to undertake technical and operational work of ISO ISO TC 114 and relevant international standard organizations, and to represent China in international standard meetings.          The committee was established in 1990, has developed into the fifth session. As a member of the watch and Clock Standards Committee, you will enjoy a wide range of rights and interests related to industry standardization, such as priority participation in the development and revision of standards, priority participation in the activities of international standard organisations, priority participation in Priority is given to access to information and information on clocks and watches; to draft national and industry standards; to have voting rights when standards are reviewed; to attend industry conferences on standardization of clocks and watches and to participate in external standard technology exchanges, etc. .          In accordance with the principle that standards come from the market and serve the market, the National Watch and clock standardization technical committee actively provides the latest trends of standardization for the domestic and international watch and clock industry, to provide standardized services for enterprises to develop markets and expand international trade, and to provide legally valid standards for domestic and foreign watch and clock enterprises, to make the standard play a better role in trade in services, regulate the market, guide consumption and facilitate the role of arbitration.          The Secretariat of the National Watch Standardization Technical Committee is located in the Light Industry Watch Research Institute, which is the permanent office of the Watch Standardization Committee. The Secretariat of the Standard Committee is authorized by the Chairman and is responsible for the daily work of the standardization of the watch and clock industry under the leadership of the Secretariat To be responsible for ISO/TC 114 convergence work; to hold the annual meeting of National Watch Standardization Technical Committee regularly; To be responsible for the daily standardization work such as the dissemination and implementation of clock standards, the collection of standard information, standardization consultation, etc. . The Secretariat is under the direct operational leadership of the Standardization Administration of China and the China Light Industry Federation, and receives assignments from the Standardization Administration of China and the China Light Industry Federation.

With the development of economy, the contradiction with the shortage of water resources is increasingly prominent. In China, the average gap between production and sales of water plants nationwide is as high as 30 percent. In water-scarce cities in central and western China, it exceeds 45 percent, and in some cities in the northeast, it exceeds 50 percent. The economic value of water leakage in urban water networks is more than 20 billion yuan. Smart water construction is not only the key to solve the shortage of water resources in China, but also the key to smart city construction.

 On November 10, the private enterprise symposium was held in Fuzhou. We will earnestly study and implement the spirit of the important speeches made at the symposium and listen to the opinions and suggestions of private entrepreneurs, we will study ways and measures to further promote the development of Fuzhou's private economy. Wang Ning, vice-secretary of the provincial party committee and Secretary of the Municipal Party Committee, attended and addressed the meeting, with Mayor You Mengjun presiding. Fujian WIDE PLUS, Fuyao Glass, Yonghui supermarket and other 57 areas of private enterprise representatives to participate in the main person in charge of the forum. Wang Ning pointed out that the important speech at the private enterprise symposium fully affirmed the important status and role of our private economy, reaffirming the party and the state's consistent position of adhering to the basic economic system and the“Two unshakeable” principle, the party and the state have clearly put forward six policy measures to strongly support the development and expansion of private enterprises, for the new era of private economic development into a strong driving force. Party committees and governments at all levels should firmly implement it, and private entrepreneurs should draw on its spiritual strength, firm confidence and determination to run their enterprises better. In the past 40 years of reform and opening-up, private enterprises in Fuzhou have emerged from scratch, becoming stronger and stronger, and a group of competitive private enterprises have emerged, Wang Ning said, private economy has become an irreplaceable and indispensable force in the development of Fuzhou. In the new era, we should further optimize the business environment and provide strong support and guarantee for the development of private economy. To address the problem, we need to take precise measures, accelerate the establishment of a Development Fund for listed enterprises, vigorously reduce taxes and fees, and further reduce the cost of enterprise labor, electricity, gas, and other costs, using the“Banyan Bohui” platform to help private enterprises recruit talent, relax the threshold of entry, encourage the use of the first (set) of products, is really a solution for private enterprises. We should adhere to the policy of“One enterprise, one policy”, carry out detailed policies, constantly innovate policies, step up the efforts of policy propaganda and interpretation, and ensure that policies benefiting enterprises are more accurate and effective. We should deepen the reform of“Supervision and administration”, speed up the examination and approval process, improve the mechanism of regular service enterprises, and provide more quality and efficient service for private enterprises. In order to build a friendly and fresh relationship between government and business, leading cadres at all levels should not push, delay or hide, but go deep into enterprises to serve them. Private entrepreneurs should seize opportunities, start businesses with passion, make bold innovations and create resplendence again.   At the meeting, a number of private entrepreneurs took the floor one after another to talk about their experiences in learning and implementing the spirit of important speeches, and to introduce the development of enterprises and the main difficulties they are currently facing, some suggestions are put forward, such as relaxing market access, reducing enterprise cost, increasing financial support, promoting innovation and R & D, implementing talent policy, etc. .

The 6th TC124(national technical committee for Standardization of industrial process measurement, control and automation) , the 3rd annual meeting of TC338(national technical committee for Measurement, control and laboratory electrical equipment, Safety Standardization-RRB- standardization committee was successfully held fNovembermber 6 to 8BeijingjChinahWorkerskers' home, fujian WIDE PLUS represented GE Jian at the meeting. The annual meeting of the Standardization Committee      The President of the Conference was Ouyang Jinsong, Director of the Institute of Technology and economics of mechanical industry instruments. More than 600 experts from all over the country attended the conference. The three-day General Assembly, the sub-standards committee to discuss the deployment of 2018-2019 work. Fujian WIDE PLUS Representative Ge Jian delivered a speech at the TC338 summing-up conference, sharing the development history of our country's automatic instruments, under the historical conditions at that time, china's scientific researchers fully mobilize their enthusiasm and creativity, joint design, separate trial production, unified identification, unified standards, scientific research results into rapid productivity, it has laid a solid foundation for the development of modern science and Technology and industry.   

From October 22 to 26, IEC61610 International Standard drafting working meeting was held in Fluke headquarters, USA. Our senior engineer GE Jian attended the International Standard drafting working meeting on behalf of Fujian WIDE PLUS.       IECTC66WG1 working group was established in October 2008, in charge of IEC61610 standard drafting working group, LEC61010 standard is for industrial automation instrument application safety aspects, including all aspects of industrial field application, for example: site temperature, humidity, working voltage, current, mechanical impact, gas, radiation, lighting, instrument manufacturing process, operators and so on, very specific, very strict requirements, our country has been equivalent to the introduction of the corresponding national standard number is GB4793. The third edition is currently in use. The Working Group is currently working on the fourth edition. Each edition has new content and improvements. The Working Group meets twice a year to discuss and process comments and suggestions from companies around the world on the draft standards, produce new drafts and issue exposure drafts. The work of the working group was serious and the atmosphere of the meeting was always warm and not ignoring every comment and suggestion.       Good news came during the meeting. At the IECTC 65 annual meeting held in Korea, we passed the“Safety requirements for data switches in industrial automation control systems” jointly drafted by our company and Beijing Yi Comprehensive Institute, the chair of Lectc65 has included the draft standard in its work, and the corresponding working group WG13 convenor, Mr. Bob of GE of the United States, also made a presentation at the conference. Our Company and Beijing Yi Comprehensive Institute are the first drafters of the draft standard, which is an important achievement of our country's standardization work and our company's standardization work.

The 17th National Congress of the Chinese trade union was held in Beijing from October 22 to 26. Silin Yudeng attended the Congress as a representative of Fujian province.

Warm congratulations to Fujian WIDE PLUS Precision Instrument Co. , Ltd. for winning the bid for“Southwest Oil and gas field materials branch, WZ-107 southwest oil and gas field branch centralized procurement of secondary materials (instrument pipe valves)”, become the branch of the standard package only a supplier. The company produces“CHPAG” brand instrument pipe valve positioning domestic high-end brands, products from the selection of materials, structural design and sealing performance, each link has been strictly tested, in recent years has been widely used in the market, product performance has been highly recognized by the market.   Pay attention to us, heart service, from now on

Recently, the“Fujian iot Intelligent Sensing Application Innovation Center”, which is jointly established by New Continent Science and Technology Group, Fujian WIDE PLUS Precision Instrument Co. , Ltd. , Fujian Strait iot Application Promotion Center, Fuzhou University, Fujian Iot Industry Alliance, Fuzhou Xicheng Electronics Co. , Ltd. , Fuzhou iot Open Laboratory, Fujian New Continent Computer Co. , Ltd. and Fujian New Continent Automatic Identification Technology Co. , Ltd. , was recently awarded the first batch of“Provincial manufacturing innovation centers” by Fujian Economic and Information Commission. Conditions are met for licensing         In accordance with the relevant provisions, the licensing unit to have more than one can promote the formation of domestic leading, with full ownership of intellectual property rights, forward-looking, or internationally leading technology; And all the funds (including R & D equipment) not less than 20 million yuan; There should be scientific decision-making mechanism, self-management mechanism, long-term cooperative mechanism of sharing benefits and risks among member units, intellectual property rights protection and other specific measures, and it should be the breakthrough of technical bottlenecks in the development of the industry in Fujian Province, a strategic innovation platform to enhance the core competitiveness of the industry.       Innovation centers need to be led by units with strong economic strength and R & D capabilities that have greater influence in the industry, it is a new type of innovation carrier established by all kinds of innovation subjects, such as upstream and downstream enterprises, scientific research institutes, universities, industry organizations, etc. , a strategic innovation platform to enhance the core competitiveness of the industry, focusing on cutting-edge technologies, applied basic research and the supply of common key technologies, transfer and diffusion, the first commercial application, and the cultivation of innovative talents, carry out collaborative innovation activities with new mechanisms and models. The province's first batch of eight manufacturing innovation centers were licensed.     The future service direction of Fujian iot Intelligent Sensing Application Innovation Center        “Fujian iot Intelligent Sensing Application Innovation Center” will fully integrate the innovation resources of“Backbone Enterprises + Key Universities + Industry Alliance”, aiming at the important application needs of Fujian province in the field of industrial iot, to build an industrial eco-circle with the integration of government, industry, research and application, which runs through the iot innovation chain and industrial chain, and to provide a technical support system and innovation platform for the development of iot intelligent sensing industry in Fujian province, the competitiveness of the manufacturing industry of Fujian province and even the whole country will be enhanced in an all-round way.  

1991 We are under the tide of reform and opening up It came into being We are based on technology As always For years Participate in the break Quartz watch movement is monopolized by the pattern Also witnessed China from manned spaceflight To the detection project Great Progress Our products are all over the country in various industrial control fields Make some contribution to the development of China's industry We plough deeper and deeper Actively promote the development of smart cities … One step at a time Not even a thousand miles Behind every harvest Is our decades of persistent research and exploration In the future We will not forget our original intention Down to earth Move on Hello, here we come!   Wechat public number: WIDE PLUS Automation

 Fujian WIDE PLUS will take part in the 29th China International Survey Control and instrumentation exhibition (formerly multinational instrument exhibition) from October 24 to 26,2010, the Booth is located at A242, Hall E 2, National Convention Center, Beijing, and will feature a number of new products, the exhibits mainly include: industrial automation products (intelligent pressure/differential pressure transmitter, temperature transmitter, electromagnetic flowmeter, instrument pipe valve, intelligent digital display instrument, etc.) , intelligent water products (intelligent remote transmission water meter, intelligent remote transmission uniform speed pipe flowmeter, remote transmission fire pressure collector, remote transmission dissolved oxygen meter, etc.) , sincerely invite your visit to guide!     Please click for details of the exhibitionAn invitation The 29th China International Survey Control and Instrumentation Exhibition   Introduction to the exhibition           Since 1983, MICONEX has successfully held 29 sessions, with more than 40 countries and regions to participate in the activities of thousands of enterprises, tens of thousands of science and technology workers and exhibition visitors more than 500,000 times. Miconex has built a long-term and stable exchange platform for the domestic and foreign instrument industry.        Miconex, as one of the first domestic market-oriented, academic, science and technology-led professional and technical international exhibition activities, from its inception to promote our country's“Manufacturing power” strategy as the theme, in the past 30 years, he has been“Leading science and technology, supporting industries, promoting exchanges and serving enterprises”, and has performed alternately in Beijing and Shanghai, it has promoted the development of measurement control and instrument technology and industry in our country, and promoted the whole strength of our instrument industry.      

In order to promote the development of China's sensor industry and promote the integrated application of Internet of Things, By the Chinese Institute of Electronics Sensing Technology Branch, China Components Association Sensitive components and sensors branch, China Instrumentation Industry Association sensor branch, China Industrial Sensor Alliance, Shaanxi Internet of Things Industry Alliance and China Sensor and Internet of Things industry Alliance six units jointly organized and selected "2018 China pressure sensor brand Top10 and innovative intelligent. After a month of online voting competition and industry experts' comments, the final results have been produced, and Fujian WIDE PLUS ranks among the best. Industrial pressure sensor TOP10(Domestic brand) Chongqing Chuanyi Automation Co., LTD Fujian WIDE PLUS Precision Instrument Co., LTD China Electronics Technology Group Corporation 49th Research Institute Mack Sensors Inc Shanghai Lodinsen Industrial automation Equipment Co., LTD Shanghai Lige Instrument Co., LTD Nanjing Gaohua Technology Co., LTD. Nanjing Gaohua Technology Co., LTD Nanjing Wotian Technology Co., LTD Chongqing Weian measuring instrument manufacturing Co., LTD Guangdong Kangyu measurement and control instrument engineering Co., LTD

In the wave of scientific and technological development in the world today, in the development trend represented by the Internet of Things, 5G communication, Industry 4.0, artificial intelligence, big data and other industries, intelligent sensor technology with MEMS and advanced sensors as the core is an important foundation for the future intelligent era. Based on mature semiconductor technology, smart sensor technology is widely used in the Internet of Things era, and the development of smart sensor technology is crucial in promoting the development of a new generation of information industry in China. On July 3, 2018, under the witness of Luo Wen, Vice Minister of the Ministry of Industry and Information Technology, Zhou Bo, Standing Committee of the Shanghai Municipal Committee and Executive Vice Mayor, the National Smart Sensor Innovation Center was officially inaugurated in Shanghai, which marks the bearing of the collaborative research and development of key and common technologies to solve China's smart sensors. The national innovation center with the strategic task of achieving the first commercialization has fully transferred into the substantive operation stage, and the strong "core" journey in the field of smart sensors in China has officially set sail.

As an important part of the new generation of information technology, the Internet of Things has a very broad prospect. It involves a lot of electronic technology, intelligent perception, recognition technology and pervasive computing and other communication perception technology, the Internet of Things is the upgrade of the Internet era.

The major special project of Fujian Province "Development and industrialization of key technologies of high-end instrument valves and pipe fittings" independently undertaken by Fujian WIDE PLUS has successfully completed various research and development tasks of the subject. Recently, the Fujian Science and Technology Department organized experts on the project site acceptance, after listening to the technical report of the research group, financial report, the expert group reviewed the relevant documents and visited the production site, after the defense and serious discussion, the expert group unanimously agreed to pass the subject acceptance.    The project of "Development and industrialization of Key technologies of high-end instrument Valves and pipe fittings" is based on double sleeve joint technology, glow ion carburizing surface hardening technology and high temperature and high pressure seal design technology, and has completed the series design of 12 high-end instrument valves and valves, which has been successfully applied to petroleum, chemical, electric power and other industries. The overall technical level has reached the international first-class level of similar products, breaking the exclusive position of foreign high-end pipe and valve parts in domestic petroleum, petrochemical, nuclear power and other industries, and forming its own brand of high-end pipe and valve parts. During the execution of the project, a total of 5 invention patents and 9 utility model patents were applied, 5 utility model patents were authorized, and 2 academic papers were published. The product indicators fully meet and partially exceed the requirements of the task.   —— Project background ——     As we all know, there are some problems in the instrument pipe and valve industry in our country, such as the pipe and valve enterprises in our country are mainly low-level, small-scale, family-based enterprises. In terms of products, due to the backward design concept, lack of technical investment, low level of manufacturing technology, lack of investment and other reasons, the leading products are still low-quality mass products, there are widespread external leakage, internal leakage, appearance quality is not high, short life, inflexible operation and other shortcomings, some products are only equivalent to the international level in the early 1980s. In the high-end application fields of oil, petrochemical, nuclear power, naval vessels and other pipe and valve parts, the internal leakage of pipe and valve parts will seriously affect the measurement accuracy of precision instruments, small external leakage may lead to catastrophic accidents, and the corrosion of the conveyed medium affects the life of pipe and valve parts, leakage rate, so these industries without exception require the use of high-reliability high-end pipe and valve parts.   —— Upper wetting advantage ——     Drawing on the development experience of Germany and Japan's high-end manufacturing industry, WIDE PLUS has long adhered to high-precision mechatronics manufacturing technology as the basis. Through unremitting efforts, both precision processing equipment and precision processing technology have formed a complete set of high-precision manufacturing technology systems, laying the foundation for promoting mechatronics manufacturing to a higher level of development. At the same time, it also creates a high-precision manufacturing technology discipline of "multi-coordinate interactive positioning". And the company has a variety of precision and ultra-precision machine tool equipment, such as 5-axis linkage machining center, CNC universal machining center, high-speed CNC horizontal machining center and other equipment from Germany, Japan and the United States, the processing accuracy can reach 100 nanometers.   —— Project advantages and characteristics ——     Our pipe and valve parts project has unique advantages, has established a high-end pipe and valve parts of their own brand, successfully broke the foreign industry technology monopoly position: 1、High reliability bushing joint technology: design a new type of double bushing joint, using metal to metal sealing pair design and test; Compensatory seal structure design; Very low leakage valve seat soft seal design; Very low leakage valve port hard seal design, so that the product to achieve zero leakage, but also repeatedly disassembled more than 30 times to maintain high sealing reliability. 2、The use of unique austenitic stainless steel corrosion resistance surface hardening technology, enhance the surface hardness (≥65HRC) and corrosion resistance (surface pitting potential ≥500mV), to meet the high temperature and high pressure high corrosion environment; 3、Based on finite element analysis technology, the valve structure is designed more optimally. 4、At the same time, we test and evaluate the reliability of pipe and valve parts: including the research

As the most popular blockchain technology in the world in the past two years, its integration with various industries is accelerating. The energy industry, a traditional heavy-duty industry, with new challenges, also has a deep and practical application foundation for blockchain.

Recently, with the strong support of Fujian Provincial Economic and Information Technology Commission, WIDE PLUS Company participated in the 16th China Strait Project results Fair, the exhibition area is located in the "Fujian Industrial Boutique Museum", and the area has set up five special exhibition areas: double and innovation platform, intelligent equipment, specialized and special new, single champion, quality brand. Focus on the display of our province's national quality benchmarking enterprises, national brand cultivation demonstration enterprises about 60. Zheng Xincong, Vice governor of Fujian Province, visited our booth to learn more about the development of industrial sensing. In this exhibition, the wireless intelligent sensing products displayed by our company have received a lot of attention, and the audience lamented the rapid development of science and technology, and wireless sensing products have blossomed everywhere in various fields, becoming a hot topic in the development of the current Internet of Things.   Vice Governor Zheng Xincong visited and learned about the sensing products of WIDE PLUS  

On the morning of April 23, 2018, under the strong support and guidance of the Mawei District government, one of the national Internet of Things industrial bases, a delegation of member enterprises of the China Sensor and Internet of Things Industry Alliance (hereinafter referred to as the delegation) investigated the Mawei District Internet of Things industrial base. Members of the mission include: Tiantong Stock (main board listed 600330), Hanwei Technology (GEM listed 300007), Sanyou Optoelectronics (New Third Board 831055), MAC Sensor (New third board 835304), China Electronics, Zhiheng Microelectronics, Beijing Zhimi, Shanghai Core Matter, Shanghai Norhang, Weika International, Mingjiang International, Zhejiang Zhongcong, Shanxi Runjiu Automobile, Xi 'an Central Measurement Control, Wanke Intelligence, Germany Endeshaus, Tongdu Capital and other 17 enterprises and China sensor and Internet of Things industry alliance leaders.     WIDE PLUS not only as a member of the alliance, but also as a representative sensor manufacturer of horsetail, warmly received the delegation, and Mr. Huang Xunsong, chairman of the company, introduced the latest achievements of WIDE PLUS to the delegation in detail.     The Mawei District government also organized a symposium, and Wu Yanrong presided over the meeting and conducted in-depth exchanges with the representatives of the delegation on investment and cooperation intentions and needs, and Chairman Huang Xunsong also attended the meeting.     Shanghai Xinwu and other enterprises have the intention to invest in large-scale sensor production lines in Mawei District, and hope to negotiate related matters with the Mawei District government in depth. Wika International and other enterprises intend to invest in the establishment of advanced sensor and standard enterprises in Mawei District, and establish a research and development center. The delegation hopes to dock with technical manufacturers and parts suppliers of modules, semiconductor grinding equipment, and sound meter filters in the horsetail area. It is hoped to carry out industrial docking such as smart city, smart environmental protection and smart community in Mawei District.