On the 23rd of this month, Fujian WIDE PLUS held a seminar on Internet of Things application technology, and the national key agent dealers attended the seminar. At the meeting, Mr. Huang Xunsong, chairman of the company, and Mr. Zou Chong, vice president of the company, analyzed and explained the current development prospects of the traditional industry and the Internet of Things, the traditional industry is facing the situation of capacity reduction and market shrinkage, and with the continuous development of intelligent technology, the new ecological chain of the Internet of things is full of vitality, and at present, all provinces and cities across the country are fully promoting the Internet of Things project. Fujian Province has also introduced relevant policies to actively support the development of the Internet of Things industry, we should follow the pace, seize the current good opportunity, expand the market, from the traditional industry to change the runway, so that enterprises get considerable development. After the meeting, the participants also visited the China Internet of Things Open Laboratory located in Mawei District, so that the participating enterprises can feel the broad wisdom market brought by the Internet of Things.

On the afternoon of September 3, the largest BRICS Business Forum to date was held at the Xiamen International Convention and Exhibition Center. Countries attended the opening ceremony and delivered keynote speeches. The theme of the forum is "Deepening BRICS Partnership for a Brighter Future". During the two-day forum, delegates will discuss four major topics: trade and investment, financial cooperation and development, connectivity, and the blue economy.       Mr. Huang Xunsong, Chairman of Fujian WIDE PLUS Precision Instrument Co., Ltd. was invited to participate in the BRICS Business Forum held in Xiamen.

In September last year, the world's largest single-aperture and most sensitive radio telescope with China's independent intellectual property rights was officially inaugurated in Pingtang County, Guizhou. Dubbed "China's Eye of heaven," the telescope has attracted attention for its ability to pick up electromagnetic signals from 13.7 billion light-years away. The "sky eye" used to receive the signal antenna in the "centripetal joint truss structure axis", is from Fujian WIDE PLUS Company. Last a year, nearly 20,000 parts are not the same The lollipop shaped metal piece, about 30 cm long, is the "axial joint truss structure shaft" made by WIDE PLUS Company, and there are more than 19,000 such accessories on the "Sky Eye". Amazingly, none of the nearly 20,000 accessories are exactly the same. The antenna is crucial to the sensitivity and resolution of the telescope, and the related accessories are manufactured with no room for error. As long as there is a deviation of 0.1 mm, the error of several hundred meters or more will be generated when receiving the signal. The antennas are distributed radially around hundreds of times, so these 'lollipops' have 3 to 5 threaded openings for mounting the upper bracket. The telescope is a curved line, and installed on the ground, there is a drop itself, so the thread on each accessory and the perpendicularity of the plane are not the same, need to be manufactured separately, its workload and difficulty is huge. In March 2015, WIDE PLUS Company organized a group of excellent technical backbone to overcome the difficulties, and it took more than a year to complete the task in April 2016. This project is the heaviest and most complex test that we have encountered in the past 20 years since the establishment of WIDE PLUS, but we did it! Excellence in small links can also lead to innovation How on earth are these more than 19,000 accessories completed? In the field of machining, everyone tries to do their own responsible process to the extreme. Small innovations in each process can eventually lead to qualitative changes and even theoretical innovations in technology. We create a table for each part, design a three-dimensional drawing, and then use the equipment to program, process, and finally inspect. Since the Angle of each thread opening is different, and the Angle deviation of the antenna needs to be kept within 0.01°, the detection error is the most difficult place in the entire process. "General equipment is difficult to detect, so we innovatively use three-dimensional detection methods to ensure accuracy based on the plane." When each part goes through each process, it has the same processing number as the "ID card", so as to clarify the specific responsible person, we must verify and confirm the drawings and procedures, and can not make a mistake. It is with such a strict process flow, the whole batch of accessories are completely fired, and the antenna installation is "seamless". In the production process, only two slightly defective waste products were detected. Because of the large quantity and complex technology. Even with nearly 30 technicians working in 24-hour shifts, they are in danger of not being able to finish on time. Deputy director of the engineering Department, senior technician Huang Wenming bold innovation, improve the processing technology, the original processing of 5 to 6 will wear the tool performance to be able to process 50 or 60, so that the processing efficiency is greatly improved. Do not forget the original intention to look forward to a more powerful precision manufacturing team The successful completion of this major project depends on the fact that we have accumulated more than 100 technicians over the past 20 years. Over the years, the road of precision manufacturing of WIDE PLUS has gone a little "lonely". "Precision manufacturing is not just 'workers', but technical talents, both proficient in light, electricity, mechanics and other disciplines, but also need to have enough patience and perseverance to cope with the long and boring processing process." To train a qualified technician for at least 7 years, the cost is equivalent to 20 software engineers. At present, China's high precision manufacturing talents are in a state of non-shortage. Mr. Huang Xunsong, chairman of WIDE PLUS Company, said that if the country wants to achieve intelligent manufacturing, the Internet of Things is the key, and there is no sensor based on precision manufacturing, it is equivalent to building a highway without a car, and it cannot eventually realize the connection of things. There are 30,000 kinds of sensors needed for the global Internet of Things, and China can only manufacture 1,500 kinds. At present, Fuzhou gathers a large number of Internet of Things enterprises, the strength of 6 months ahead of the country. It is hoped that more capable enterprises can join the field of precision manufacturing and occupy new heights for China's

As a representative of Fujian iot enterprises, on June 18, Zhou Ji, president of the Chinese Academy of Engineering, visited our company for research, and Huang Xunsong, chairman and Zou Chong, vice president, reported the company's development overview to the president successively. As a well-known high-tech enterprise in the perception layer of the Internet of Things, the company has laid a solid foundation in the industrial Internet of Things industry after decades of development and innovation, and the industrial sensors independently developed and manufactured are widely used in domestic enterprises in various working conditions, Chairman Huang Xunsong introduced: "Through seven or eight years of research, we have solved the technical problems of material heat treatment in the aspect of high-precision pipe valves, and the surface hardness of the material has reached 50-70 Rockwell hardness, making the product reach the world-class level." The company has not only achieved fruitful results in the industrial field, but also successfully brought advanced industrial technology into the people's livelihood field. In terms of innovation, it has been praised by Dean Zhou Ji. During the period, President Zhou Ji and his delegation also visited the production workshop, the company's independent research and development of mechanical and electrical integration of automated production lines, deeply attracted everyone's attention. From the product innovation, the advanced degree of production all reflect the development level of the Internet of Things technology innovation of WIDE PLUS company, President Zhou Ji hopes that WIDE PLUS can continue to actively promote the good trend of scientific and technological innovation and development.

It is reported that in order to fully mobilize the enthusiasm and creativity of standardization workers in Mawei District, encourage enterprises to be a model of standard formulation and promotion and application, and promote the model of Chinese standards "going out", Mawei District Market Supervision Bureau actively guided enterprises to participate in Fujian Province 2016 standard contribution Award application options. Finally, the Fujian Provincial People's Government issued the notification of the 2016 Fujian Provincial Standard Contribution Award, Fuzhou Mawei District Fujian WIDE PLUS Precision Instrument Co., LTD., Fujian New World Computer Co., LTD., Chinalco Ruimin Co., Ltd. three enterprises were recognized by experts and all sectors of society, and a total of three standards won the second prize of 2016 Fujian Provincial Standard Contribution Award.     In the future, the company will take this opportunity, based on its own advantages, aiming at the international stage, actively promote Chinese standards to "go out", strive to make Chinese standards rise to international standards, jointly drive enterprises, products and equipment in the area to go out, further carry forward the spirit of shipping culture, and build a micro-electronic Internet of things and cross-border e-commerce information platform for the world. Promote Mawei economy to a higher level.

On February 6, the city's innovation and Development Conference was held in the Straits International Convention and Exhibition Center. Ni Yuefeng, Deputy Secretary of the Provincial Party Committee and Secretary of the Municipal Party Committee; You Mengjun, Deputy Secretary of the Municipal Party Committee and Mayor; Wei Keliang, Weng Yuyao, Chen Qiuli, Liu Jieming, heads of relevant provincial departments; Chen Yongzheng, Wang Changping, LAN Siren, Chen Yuanzhong, Huang Youlin, Tong Xin, Wang Xinmin, Liu Bo, Cao Rong, leaders of Zayong Universities and research institutes; As well as Chen Weimin, He Jingyan, Huang Zhongyong and other four sets of municipal teams and Fuzhou New District leaders and more than 1,100 representatives of entrepreneurs gathered together to discuss innovation and seek common development.

On the 1st, a "heavyweight" project of Fuzhou Development Zone, China (Fuzhou) Internet of Things Industry Incubation Center (Phase I), laid the foundation stone in the Kuaizhou 8 plot of Fuzhou Development Zone.           It is understood that the first phase of the Internet of Things incubation center will be built into the Internet of Things industry public service platform, technology innovation center and industrial incubator, focusing on promoting the application of NB-loT technology in various industries and creating NB-IoT application model points; At the same time, relying on well-known research institutes and enterprises such as Shanghai Institute of Microsystems of the Chinese Academy of Sciences and AstrI of Hong Kong, the national NB-IoT open laboratory has been built in Mawei to carry out research and development, testing, certification, standard formulation, incubation and other work, and strive to complete the laboratory launch ceremony and listing in January 2017, and put into use on May 1.          On the same day, 17 projects such as SAP Industry 4.0 project, Guomai Internet of Things Hospital project, and Power Automation Smart grid project of Customized Plus (Shenzhen) Technology Co., Ltd. landed in the Internet of Things industrial base, with a total investment of 2.798 billion yuan, which will be applied in intelligent water, intelligent pipe network, intelligent transportation, intelligent logistics, smart grid, smart medical, smart home and other fields. Through incubation, small and medium-sized enterprises with animal networking have grown rapidly, and a number of Internet of Things leading enterprises with international competitiveness have been created to achieve the agglomeration and development of the Internet of Things industry.            According to the relevant person in charge of the information bureau of Fuzhou Development Zone, the Internet of Things Industrial Park focuses on the construction of the Internet of Things industry public service platform, technology innovation center and incubator, of which the first phase of the planning land of 118 acres, located in the Kuaian Park area 8 plot, the total construction area of 316,000 square meters, the project construction period is 24 months, will build the Internet of Things industry incubator and its supporting service facilities. The recently widely concerned Huawei narrowband Internet of Things open lab is also preliminarily planned.            It is understood that in order to support the development of the Internet of Things industry, the provincial government has previously issued the "Eight Measures on Accelerating the Development of the Internet of Things Industry" to support Fuzhou to further enhance the agglomeration effect of the Mawei Internet of Things industrial base and deepen the creation of a national Internet of Things industrial concentration area. At present, the development zone has passed the identification of 65 iot enterprises, more than 100 associated enterprises, gathered a group of core competitive iot well-known enterprises such as New Land Technology, WIDE PLUS, Guomai, Guanlin, distributed in the iot industry chain perception layer, transmission layer, application layer and other main links.           In 2016, the output value of iot related enterprises in the development zone is expected to reach 54 billion yuan, an increase of 20%, and it is expected to exceed 60 billion yuan in 2017, and strive to build 100 billion iot industrial park by 2020. The application of Internet of Things products and services has developed into an all-round and multi-field development, and has strong competitive advantages in smart city construction, smart home, and car networking.