Search
Confirm
Cancel
Industrial automation
搜索
Search
Industrial Automation

WP-9000 series passive · DC signal converter (output loop power supply)

1a9d94be-15b8-4751-bb15-02ba28b501e5 (1)
1a9d94be-15b8-4751-bb15-02ba28b501e5 (1)
>
<
Product Models:
Retail price
0.0
Market price
0.0
Number of views:
1000
The WP-9000 series passive/DC signal converter (output loop power supply) converts (4-20) mA signal into the required DC signal output by this converter. Mainly used for DCS and PLC systems with input loop power supply.
Product description

The WP-9000 series passive DC signal converter (output loop power supply) converts (4~20) mA signal into the required DC signal output by this converter. Mainly used for DCS with input loop power supply,
PLC system.


   This converter is a loop power supply mode, and the input loop-the output loop are completely electromagnetically isolated.


◆ Features

  ● Isolate and convert DC current (4~20) mA signal input.

  ● Signal transmission isolated output (4~20)mA.

  ● Loop power supply (12~28)VDC

  ● Input circuit overcurrent protection.

  ● Plug and unplug terminal blocks, DIN rail card installation.

 

● Power supply

   Output loop power supply: (12~28) VDC


● Input signal

   Current input: (4~20) mA


● Output signal

   Output current: (4~20) mA

   Allowable load resistance: (50~350)Ω (at 4mA~20mA output)

   ripple (Vp-p): <10mV


● Performance Index

  Standard accuracy: ±0.5%FS (when the load is 100Ω)

  * Note: The smaller the load, the higher the accuracy. When the load increases by 100Ω, the accuracy decreases by 0.1%

   temperature drift: ±0.015% / ℃

   Response time: ≤1s (10→90)%

   Stable time: ≤3s

   Influence of power supply voltage fluctuation: ±0.1% (allowable voltage range)

   Influence of load resistance change: ±0.1%/250Ω

   Channel isolation: isolation between input-output-power supply

  Insulation resistance: ≥100MΩ/500VDC (AC)

   Isolation capacity: 1500VAC/1 minute 50Hz

  Anti-electromagnetic compatibility: in line with IEC 61000 related anti-electromagnetic standards


● Environmental parameters

  Working temperature: (-20~+60)℃

  Storage temperature: (-40~+80)℃

  Environmental humidity: (5~+95)%RH (no condensation)


Structure

   Clip-on type; Modular watch core; ABS material case; Plug-in terminal

   Machine weight: about 110g


◆ Dimensions

   Dimensions: width × height × depth = 16 × 116 × 110 (mm)

 
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Related Products

Smart differential pressure flowmeter is a smart flowmeter based on battery-powered low-power Internet of Things technology. It is mainly used for the detection of large-diameter water flow in urban water affairs and municipal pipe networks. It uploads collected water flow data and other information to the cloud server through a wireless remote
There are numerous municipal fire hydrants, scattered installations, destruction of fire hydrants, embezzlement of fire-fighting water, insufficient pressure of fire-fighting pipelines, and other problems. As a result,
WP304D temperature collector adopts MEMS temperature sensor chip to be encapsulated in a specific case. The temperature sensor and the conversion circuit are integrated to form a small special temperature sensor. Its appearance is small and exquisite, the measurement accuracy is high, the reliability is good, the power consumption is low,

Messages

Username used for comment:
Messages
Description:
验证码

CONTACT

Fujian WIDE PLUS Precision Instrument Co., Ltd.
National unified technical service telephone:
ADD:No.16, Xingye West Road, Mawei High-tech Zone,Fuzhou,Fujian China 350015

FOLLOW US

Copyright © Fujian WIDE PLUS Precision Instrument Co., Ltd. Powered by www.300.cn 闽ICP备05035149号-1